Comments on: Who said Nokia N95 VOIP + Magic Jack doesnt work :)

By: kiran

kiran — Tue, 16 Jun 2009 21:45:13 +0000

@jea, yeah it is scary…as TOS dont allow to do it..I just did this for fun as I read in many posts that they couldnt get it working…but no one should do it..may be in near future, MJ might support BYOD ( bring your own device) and then you dont have to deal with this mess and you can use on it on your own…Vonage is costly, but if you have softphone acct, they will allow you to use in on any VOIP device…or we have get gizmo ..if google grandcentral opens up, may be we dont need MJ also

By: jean

jean — Tue, 16 Jun 2009 08:47:21 +0000

that debate about lawsuits was a little bit scary.

By: jean

jean — Tue, 16 Jun 2009 08:38:56 +0000

that’s sad. here i finally get a headstart and then they go and change stuff. hehehe. still, i am grateful for your help. let’s keep our fingers crossed and hope that they figure something out. or maybe you will – again. cheers!

By: kiran

kiran — Tue, 16 Jun 2009 07:30:22 +0000

jean, you are on the right track..you should put :5070 ; I just posted a comment on your earlier comment, MJ updated their Server and it found a way to block these either by encrypting or changing their SIP credentials etc..So the SIP settings reported by MagicJAck might not be correct..I’m still not sure yet…this is new and have to be looked at…

By: kiran

kiran — Tue, 16 Jun 2009 07:27:31 +0000

Jean… Looks like MJ has updated their software & SIP credentials (proxy Server/Realm values etc ) ..in short unless we know the realm values/proxy address , we cannot make it work…There is already discussion on this in this forum if you are interested :
http://www.dslreports.com/forum/r22528488-Defcon-1-Massive-ATA-failure~start=20

Till someone finds out an way to bypass this new rules or whatever, you have to wait ..sorry..

By: jean

jean — Tue, 16 Jun 2009 07:26:44 +0000

why does it say account cannot be enabled, verify your user name and password? how do i do that?

also, i followed your :5070 at the end of your proxyname. that’s when this new error showed. i guess this is more promising than the first error. now that i am stuck with validating, i do not know where else to click. hehehe. i even went to my email validation from mj and reclicked the link, still, the same. i am sorry for asking sooo many questions. as you can clearly see, i am a dumdum. only i don’t give up.

thanks in advance for your help, kiran.

By: jean

jean — Tue, 16 Jun 2009 06:41:39 +0000

hi kiran. it’s me again. i got the sip settings but when i put it into the x-lite, i get an account cannot be enabled, unknown error, contact the administrator. i do ot understand what i am doing wrong. can you tell me what to put on each window? maybe i missed something.

By: kiran

kiran — Mon, 15 Jun 2009 20:57:41 +0000

hey jean..congrats and glad to know that it worked….see its not all rocket science ..let me know if you have any questions…

By: jean

jean — Mon, 15 Jun 2009 20:43:07 +0000

kiran, you are the man! it’s 3.47am here and after a lot of sweating and hair pulling (girls are more dramatic and hysterical) i have finally gotten it the get sip to work. for an idiot like me, the config.ini really was a had nut to crack. so i’m on to the next step. thanks for the reply and help. cheers!

By: kiran

kiran — Mon, 15 Jun 2009 17:34:58 +0000

Charles,
Xlite crendentials are very simple ..I have already posted the xlite screenshot in my blog and also N-95 SIP profile settings….you might want to check your SIP credentials via magicjack suite…I guess MJ might have updated the credentials few days back…